Roof mouldings

Started by 00quattro00, January 03, 2011, 07:29:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

00quattro00

How do you get the moulding off that runs along the edge of the roof without bending them? My ones were completely toasted so I just ripped them off. Also I have heard of people using 4 door ones on a 2 door, would they work ok for a track car?
Land Rover Discovery 300tdi
Land Rover 110 4bd1t

choppy16v

pretty tricky. i think i used a terminal driver and some tape
start at the back then tape it when you do the front so it doesn't fall down and bend.