Heater Core Sealants and Parts needed ?

Started by Andy_007, April 14, 2012, 05:27:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Andy_007

Just started doing my heater core replacement this afternoon on my 97 Audi a6 c4, got as fair as been able to remove the ducts. What parts and sealants do i need?, only have the heater core atm
2007 Audii A4 Quattro 3.0TDI

BB

Once you have pulled it all to bits you will find out what you need.
You will probably just be able to use some adhesive foam stuff and maybe just selastic or something.
Be careful to not use a stinky silicon or something.
They have some foam stuff that falls to bits in m3s that directs the air. the air goes everywhere once they do that.
The end is nigh, but the end of what is the question?

Andy_007

Thanks for that, finally got it out this afternoon. Man the heater box was stuck in well, ended up spraying De-solvit around the seal, and leaving it for a hour. All the foam had fallen to pieces. Hopefully get it all back together tomorrow.
2007 Audii A4 Quattro 3.0TDI

Andy_007

Finally got heater box back in today, just needed heater core and foam replaced, all the motors were fine. At least i had some help this morning :P
2007 Audii A4 Quattro 3.0TDI