Replaced Golf mk6 stereo and triggered airbag light, Help!

Started by Sidbajaj, September 17, 2018, 07:12:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Sidbajaj

Hi Guys, this is my first post here, needed some help from you VW Guru?s. I installed a RCD330G. The mechless version. While I did that I removed the passenger airbag warning light to remove some cables from the old stereo tapped into the Climatronic. I made the mistake of switching on the ignition to test without reconnecting the light.

Now the car is giving me a airbag warning light... pretty silly thing to do, I know!

Is there any way to maybe unplug the battery or something and clear the light, or do I have to go to a VW dealer and shell out mega bucks for a vagcom? 

Anyone with a vagcom that can help in central auckland. I?ll come to you and bring a six pack to show my appreciation! :)

KsDub

Not an expert but disconnecting the battery for some period of time should reset the code

The Red Warrior

I can do it for you if you're willing to travel Botany.
You may find someone closer though if you want to wait.

GLIDN

I'm based on the shore if you'd like to swing past. Can certainly assist.
Audi A4 DTM - K04 NZ New | All bolt-ons | Carbon Clean done
2012 MK6R Golf |Stage 3+ | Stage 4 DSG | Tuned & Built by HSP Tuning

Sidbajaj

Thanks for the offer of assistance, I managed to find someone with a cable who reset the light for me!

Next project... get the reverse camera installed...

Sidbajaj

Quote from: KsDub on September 18, 2018, 08:32:54 AM
Not an expert but disconnecting the battery for some period of time should reset the code

Unplugging the battery doesn?t reset this light. Tried it overnight and it didn?t work for me.  :(