Auto trans dipstick length

Started by user2154, December 06, 2018, 06:08:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

user2154

01F 321 431 B

Google comes up with not much, still searching.

Anyone know the length?

http://www.vask.org.nz/index.php?topic=27692.0

tjsmada

Is this the one fir the c4 trans? I bought one when I had my auto s4 and I remember measuring it - I'll see if I can find the measurements

tjsmada

I'm guessing you read this:
https://forums.quattroworld.com/a6100/msgs/7173.phtml

Can't say for certain if it's the same dimensions though

user2154

different part number so I don't know if the length is the same or not.

Don P

Got dipstick on 2.3 auto transmission can measure for you if you want

user2154

When you get the time, thanks!

Can you also tell me the part number of the dipstick?

Don P

Dip stick part no is : 097 321 431
Length from tip to where it rests onto the tube is roughly 390mm.
Took some photo?s , bit big to post.
Hope this helps.
Don.

user2154

Thanks for that. Almost there.. Does the dipstick show part number A or B? Are there any other numbers on the dipstick or tube?

Don P

No no?s on the tube that a person can see.
There is no letters  either side of the no on the dip stick.

Don P

Found some info
Gear box models APA,CBU,ANZ,CEA use dipstick with the letter C ,tube 097321405B for these gear box no?s.
Models AEM the letter A and later succeeded by the letter E.
The AEM box , 097321405F tube used in conjunction with the these other options:
097321406B,097321431E,003321419B.
www.oemepc.com

user2154

Thanks for that. My trans is CBF, might chuck my VIN into that and see what happens..