Radio not saving settings

Started by divey_, June 14, 2019, 09:31:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

divey_

Hey guys

I have an aftermarket Kenwood stereo in my Polo, however it's not saving the settings (defaults to Demo mode) each time the ignition is switched off.

I've checked the Constant and Ignition wiring, and swapped them both around just to be sure but that didn't do anything different i.e. back to default.

Am I missing something glaringly obvious? Connections all seemed okay and but rewired to be sure but no luck.

Any advice appreciated!
'09 Golf GTI

divey_

Update - used a multimeter and tested the voltage for both the constant and ignition and they all came up with the right voltage e.g constant at 12v on/off and ignition at 12v when on only. So now I'm stumped  :(
'09 Golf GTI