Author Topic: Oil filter mount thread stuck in housing  (Read 3676 times)

0 Members and 1 Guest are viewing this topic.

Offline eliotbnz

  • Posts: 7
Oil filter mount thread stuck in housing
« on: October 30, 2021, 02:28:27 pm »
Hey team,

Performing my first oil change on a non-japanese car. Have had it done professionally since owning the vehicle, but was sick of overpaying. Got a kit from Harry's delivered, seems all good.

Well the existing oil filter was extremely tough to remove, and has left behind the built-in mounting thread. So my new oil filter can't fit, until I remove either the same piece from my new filter, or the old piece from the oil filter housing on the engine itself - at least this is what I can make of it.

Wondering if anyone has had any experience with this here and can offer advice?

Offline Hughbugger

  • Posts: 16
Re: Oil filter mount thread stuck in housing
« Reply #1 on: February 05, 2022, 11:54:01 pm »
Pretty sure I had something weird like this happen when I did my scirocco. Repost this to the Facebook group and I'm sure somebody will know if you haven't got it sorted already.
2010 - Scirocco 2L TSI
2009 - Tiguan TDI 4Motion
2009 - MK5 GTI Pirelli edition STG1
2008 - Mk5 TSI

Offline mark2 golf

  • #
  • *
  • Posts: 2055
Re: Oil filter mount thread stuck in housing
« Reply #2 on: February 08, 2022, 07:56:17 am »
Just grab it with some multi grips and unscrew it. It happens every know and then. No Biggy
89 mk2 1.8t
97 mk3 gti 1.8t
02 Allroad tdi
99 s430 merc
90 190e 2.6