VASK Forum (VW Audi SportKlub of NZ)

AUDI => A4 - S4 - RS 4 - A5 - S5 - RS 5 => Topic started by: Silstarnz on January 05, 2018, 12:52:50 pm

Title: Audi A4 B8 Cruse Control Retrofix
Post by: Silstarnz on January 05, 2018, 12:52:50 pm
Hi there anyone knows how to or interested in adding curse control into my 2010 Audi A4?
Title: Re: Audi A4 B8 Cruse Control Retrofix
Post by: Trofeo on January 05, 2018, 01:57:42 pm
My wife does a pretty good job of curse control when she's in the car with me  :laugh:
Title: Re: Audi A4 B8 Cruse Control Retrofix
Post by: byront8 on January 05, 2018, 02:08:38 pm
Install a4 b8 stalks that have the cruise control on them, and then code to the car using VAG-COM.

Cruise control stalks - 8K0953502BD (might also be without the BD suffix)
Cruise control surround - 8K0953516B

Crude coding requirements;
01 - Engine
Coding or Login - I think it's login
'11463'

&

16 - Steering Wheel
Long Coding
Edit coding with the corresponding digit to enable cruise
Title: Re: Audi A4 B8 Cruse Control Retrofix
Post by: Silstarnz on February 16, 2018, 09:25:14 pm
Thanks for the reply sorry for the delayed responce.

Are you able to advise if this unit will also work for the Avant?

And are you able to provide a recommendation on a VAG-COM tool or are they all the same

THanks Heaps!
Title: Re: Audi A4 B8 Cruse Control Retrofix
Post by: byront8 on February 19, 2018, 11:23:46 am
Pretty sure the part numbers posted are the stalks for the Avant, as these were the part numbers i used.

Although quickest way to check is to make sure the images on the stalks look like the ones you have (the sedan is missing the rear wipe on the right hand stalk)

Best to buy a real VAG-COM, i've had three fakes in my life and they all didn't work properly, a used VAG-COM cable is worth its weight in gold.
Title: Re: Audi A4 B8 Cruse Control Retrofix
Post by: GLIDN on February 20, 2018, 09:49:45 am
Install a4 b8 stalks that have the cruise control on them, and then code to the car using VAG-COM.

Cruise control stalks - 8K0953502BD (might also be without the BD suffix)
Cruise control surround - 8K0953516B

Crude coding requirements;
01 - Engine
Coding or Login - I think it's login
'11463'

&

16 - Steering Wheel
Long Coding
Edit coding with the corresponding digit to enable cruise


Doing these codes on an A3 this morning.
ECU coding needs to be done under Coding-II (some cars do not have this ability.

Regarding Steering Wheel -16 coding?
Unless the steering wheel control module supports it? It will not code either, providing you invalid r out of range code.
Title: Re: Audi A4 B8 Cruse Control Retrofix
Post by: byront8 on February 20, 2018, 11:41:49 am
Doing these codes on an A3 this morning.
ECU coding needs to be done under Coding-II (some cars do not have this ability.

Regarding Steering Wheel -16 coding?
Unless the steering wheel control module supports it? It will not code either, providing you invalid r out of range code.

Sorry i've got no ideas about A3, i know this works for the A4/A5/Q5 as they all use the same stuff inside.